Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the internal ceiling of the Volkswagen Passat

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and remove the internal roof lining of the Volkswagen Passat. First of all, we get on board the car and start removing all the elements of the roof; we start by removing the interior lights, disconnecting the electrical connectors of the bulbs, as shown in the video.

At this point, we remove the sun visors and grab handles, also removing the plastic pillars; we lever the ceiling until it comes off completely, applying the reverse process for reassembly!


Posted on 3 July 2025 by ScegliAuto


Related tutorials

How to Replace the Headlining in a Volkswagen Passat
How to Replace the Headlining in a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) This guide briefly explains the instructions needed to dismantle and replace the headlining in a Volkswagen Passat. First, get into the vehicle and s…
How to Repair the Sun Visor Clip on a Volkswagen Passat
How to Repair the Sun Visor Clip on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Below we will discover the instructions that will allow us to repair the sun visor clip on a Volkswagen Passat. First, get inside the cabin and start…
How to Remove the Roof Lining of a Volkswagen Passat
How to Remove the Roof Lining of a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Below are the main instructions on how to remove and replace the roof lining of a Volkswagen Passat. First, get inside the cabin and start removing a…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos