Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the timing belt of the Volkswagen Polo 1.0 TSI

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Timing belt

See other generations:
Video tutorial

Let's see the instructions on how to disassemble and replace the timing belt of the Volkswagen Polo 1.0 TSI. First, we open the hood of the car and start by removing the coolant reservoir; then we unscrew the engine support bolts, in order to remove it, as shown in the video.

At this point, we remove the distribution cover, unscrewing the side bolts; we lift the car and remove the front right wheel, disconnecting the serpentine belt and removing the crankshaft pulley.

We then proceed with the replacement of the timing belt, following the video tutorial until the end!


Posted on 15 June 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this guide, we will see how and when to change the timing belt of the Volkswagen Polo with TSI engine. The timing belt on this type of engine shou…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) It will be possible to replace the timing belt of the Volkswagen Polo 1.2 TSi by lifting the car with a jack or a bridge so that it is possible to lo…
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To replace the timing belt of the Volkswagen Polo 1.0 TSi, you will need to lift the car in such a way that it is possible to remove the front right …

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - How much does it cost to replace the timing chain of the Volkswagen Polo 1.2 petrol? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos