Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat in the Volkswagen ID.4?

Model: Volkswagen Id 4 MK 1 - Years 2020-2026
Part: Rear bench seat

In this tutorial, you will learn how to remove the rear seat in the Volkswagen ID.4, a very simple and quick operation. First, open both rear doors, then grasp the base of the seat from one end, pull it upwards with force, and release the corresponding clip. Continue by releasing the side clip in the same way, then move to the opposite side and repeat the process. At this point, simply extract the seat from the cabin and, if necessary, remove the backrests by unscrewing the various securing bolts that have just been freed.

Posted on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seat Headrest of the Volkswagen ID 4
How to Remove the Rear Seat Headrest of the Volkswagen ID 4
Volkswagen Id 4 (2020-2026 / MK 1) In this guide, you will learn how to remove the rear seat headrest of your Volkswagen ID 4 by yourself. First, ensure you have parked the car safely,…
How to Remove the Headrest of the Volkswagen ID.4
How to Remove the Headrest of the Volkswagen ID.4
Volkswagen Id 4 (2020-2026 / MK 1) Follow this guide for instructions on how to remove and replace the front headrest of the Volkswagen ID.4, as well as the ID.6. First, get inside the…
How to replace the rear lights in the Volkswagen ID.4?
How to replace the rear lights in the Volkswagen ID.4?
Volkswagen Id 4 (2020-2026 / MK 1) In this tutorial, we will see how to replace the rear lights on the Volkswagen ID.4, a very simple and quick operation. First of all, let's make sure…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos