Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

The fuse for the operation of the diagnostic socket or OBD port is located inside the fuse box situated in the cabin, specifically behind the glove compartment on the passenger side. The fuse in question is labelled F 12 and has an amperage of 7.5 A. To replace it, open the fuse box and extract the damaged fuse using needle-nose pliers; then insert a new fuse into the socket, ensuring it has the same amperage.

After replacing, close the fuse box and test the operation of the socket.


Posted on 21 March 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) The following steps will show you the diagram and positioning of the fuses, relays, and OBD socket of the Volkswagen Golf. First, get inside the vehi…
Volkswagen Golf (2019-2026 / Golf Viii, MK 8, Golf 8) If you want to access the data from the ECU of your Volkswagen Golf Mk8 but do not know where the OBD port is located, follow the simple steps descri…
Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) Locate the fuse boxes of the Volkswagen Golf VI: the engine compartment fuse box is found between the starter battery and the right side of the bodyw…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Golf 2008-2012 - What is the position of the starter relay in the Volkswagen Golf mk6? Read answer
    • Golf 2008-2012 - Where is the Volkswagen Golf 6 reverse light fuse located? Read answer
    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos