Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Folding Mirrors on a Volkswagen Touran

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Side mirror

See other generations:
Video tutorial

Let's see how to install folding mirrors on a Volkswagen Touran. The procedure for each door is as follows: remove the cover from the door handle; unscrew the 2 T30 screws under the cover, then the 2 T20 screws at the bottom of the door.

Unclip the 6 clips holding the door panel. Pull towards you and then upwards.

Disconnect the wires and the handle cable (note the positions to reconnect them correctly). Replace the control panel with the new one (which has the folding button); unscrew the mirror screws (you will need an assistant to hold it while you unscrew); disconnect the connector and green clip from the door; install the new mirror, routing the wires in the original position.

Tighten well and check the seal. Replace the module/servomotor in the door (unscrew the T20 screws and pull towards you, then screw back in).


Posted on 27 March 2026 by ScegliAuto


Related tutorials

Volkswagen Touran (2003-2015 / 1T, MK 1) To replace the interior rear view mirror on a Volkswagen Touran, use a tool like a screwdriver to lever off the internal clips that secure the mirror…
Volkswagen Touran (2015-2024 / 5T, MK 2) This brief guide outlines the main steps to install roof bars or roof racks on a Volkswagen Touran; it is important to note that each model of roof b…
Volkswagen Touran (2003-2015 / 1T, MK 1) Is the mirror on your Volkswagen Touran damaged? Here’s how to remove the mirror from inside the Touran's casing. Pry between the perimeter of the mi…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to reset the tyre pressure warning light on the Toyota Yaris Hybrid?

To reset the tyre pressure warning light on the Toyota Yaris Hybrid, inflate the tyres until they reach the optimal pressure value: the recommended pressure is indicated on the sticker located on the driver's door pillar. Once inflated, navigate through the menu that appears on the instrument cluster: select the option related to tyre pressure and proceed to select the reset option. After completing the operation, you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos