Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Bulbs in the Front Headlight of a Volkswagen Golf Mk4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Headlight bulb

How do you replace the bulbs located in the front headlight of a Volkswagen Golf Mk4? Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Find the inspection cap of the headlight (at the rear of the headlight) and remove it (remove the air intake kit or battery if space is minimal). Pull the bulb holders out of the headlight and extract the damaged bulbs using a screwdriver. Fit the new bulbs (ensuring they are the correct type and size) and insert the bulb holders back into the headlight housing. Reassemble all previously removed parts.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) How to change the front headlamp bulb on a Golf Mk5? Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secu…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Replacing the blown bulb in the front headlamp of a Volkswagen Golf 5? Here’s how to remove and replace it. Open the front bonnet by pulling the leve…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the headlight bulb of the Volkswagen Golf 6, open the bonnet to remove the plastic cover located at the top of the headlamp for easier acc…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - How to remove the headlight bulb of a Volkswagen Golf? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos