Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Front Dash Cam on Volkswagen ID 4

Model: Volkswagen Id 4 MK 1 - Years 2020-2026

Below are the main instructions to install the front dash cam on a Volkswagen ID 4. First, get into the vehicle with a compatible camera model; then remove the plastic cover of the fuse box and the side cover of the dashboard, also disassembling the plastic pillar to route the power wiring (to reach the fuse box). At this point, check the camera's functionality and adjust its angle accordingly.

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Parking Sensor of the Volkswagen ID 4
Replacing the Front Parking Sensor of the Volkswagen ID 4
Volkswagen Id 4 (2020-2026 / MK 1) In this brief guide, you will find instructions to remove and replace the front parking sensors of the Volkswagen ID 4. First, move to the front of t…
DIY Installation Guide for the Draw-Tite Tow Bar on the Volkswagen ID.4
DIY Installation Guide for the Draw-Tite Tow Bar on the Volkswagen ID.4
Volkswagen Id 4 (2020-2026 / MK 1) As shown in the video, to mount the tow bar on the Volkswagen ID.4, you will need to remove the 6 screws that hold the outer part under the boot. Rem…
Where to Find the OBD2 Port of the Volkswagen ID 4
Where to Find the OBD2 Port of the Volkswagen ID 4
Volkswagen Id 4 (2020-2026 / MK 1) To access the OBD2 port of your Volkswagen ID 4, simply read carefully what is described in the following guide and apply it step by step. First, get…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos