Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuse Box of the Volkswagen ID 4?

Model: Volkswagen Id 4 MK 1 - Years 2020-2026
Part: Fuse box

In this mini guide dedicated to your Volkswagen ID 4 (2020-2023), discover where the fuse box containing all the vehicle's fuses is located. First, park the car safely, then turn it off completely and step outside. Lift the front bonnet and locate the fuse box on the right side of the engine bay. Finally, remove the cover of the fuse box with your own hands to access the fuses of your Volkswagen ID 4. Before working on them, disconnect the battery.

Updated on 2 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where are the fuses located in the Volkswagen ID.4?
Where are the fuses located in the Volkswagen ID.4?
Volkswagen Id 4 (2020-2026 / MK 1) All the fuses of the Volkswagen ID.4 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will…
Where are the fuses located in the Volkswagen ID.4?
Where are the fuses located in the Volkswagen ID.4?
Volkswagen Id 4 (2020-2026 / MK 1) Each of the fuse boxes of the Volkswagen ID.4 contains the fuses that regulate the operation of the devices on the car: in this type of vehicle it wi…
Where is the OBD port of the Volkswagen ID 4 located?
Where is the OBD port of the Volkswagen ID 4 located?
Volkswagen Id 4 (2020-2026 / MK 1) Thanks to the steps described in the following guide, you will be able to find the OBD port located inside the cabin of your Volkswagen ID 4 by yours…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos