Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the 12V Battery on a Volkswagen ID 4

Model: Volkswagen Id 4 MK 1 - Years 2020-2026
Part: Battery

Briefly, we will see the instructions that will allow us to remove and replace the 12V battery on a Volkswagen ID 4. First, open the front bonnet of the vehicle and start removing the plastic cover and the control unit located above the battery; then disconnect the cables from the terminal and subsequently the positive and negative terminals of the battery, as shown in the video. At this point, unscrew the battery bracket screw, removing it from its compartment; replace it with the new original one, inserting it in the correct orientation and reconnecting the terminal.

Posted on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in the Volkswagen ID.4
How to Replace the Battery in the Volkswagen ID.4
Volkswagen Id 4 (2020-2026 / MK 1) In this video, we will see step-by-step instructions for removing and replacing the 12V battery in the Volkswagen ID.4. First, open the bonnet of you…
How to change the battery of the Volkswagen ID4 key
How to change the battery of the Volkswagen ID4 key
Volkswagen Id 4 (2020-2026 / MK 1) In the following article, we will see how to replace the battery of the Volkswagen ID4 key. For this operation, we will need a small flathead screwdr…
Replacement of the battery in the Volkswagen ID 4 key remote.
Replacement of the battery in the Volkswagen ID 4 key remote.
Volkswagen Id 4 (2020-2026 / MK 1) The instructions provided in this guide will show us how to disassemble and replace the battery of the Volkswagen ID 4 key remote, in simple steps. F…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos