Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Dipped Beam Bulbs on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Headlight bulb

In this tutorial, see how to replace the dipped beam bulbs on a Volkswagen Polo, a very simple and quick operation. First, ensure the key is not inserted for safety, then open the bonnet, locate the cap at the back of the headlamp in question, and remove it. Next, grasp the old bulb, slightly rotate it counter-clockwise, and pull it out of the housing. At this point, simply disconnect the power connector, connect it to the replacement, and reassemble everything by following the reverse procedure.

Posted on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on a VW Polo
How to Replace the Front Headlight Bulbs on a VW Polo
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) Let’s replace the front headlight bulbs on your Volkswagen Polo. Here’s how to remove them from the headlights. Open the front bonnet by pulling the …
How to replace the rear headlight bulbs in the Volkswagen Polo?
How to replace the rear headlight bulbs in the Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this tutorial we can see how to replace the rear headlight bulbs in the Volkswagen Polo, an extremely simple and quick operation. First of all, ma…
How to replace the rear headlight bulbs in the Volkswagen Polo?
How to replace the rear headlight bulbs in the Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this tutorial, we can see how to replace the rear headlight bulbs in the Volkswagen Polo, an extremely simple and quick operation. First of all, m…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos