Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Replacing the low beam bulb on a Volkswagen Polo.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Headlight bulb
Operation: Replacing the low beam bulb on a Volkswagen Polo.

In this very short video tutorial today, we can see how to replace the low beam bulb (H7) on a fourth-generation Volkswagen Polo, model 9N produced from 2001 to 2009. We start by opening the vehicle's engine hood, then removing the rubber dust cover located on the back of the headlight, then we grab the bulb holder and rotate it slightly counterclockwise to remove it, finally we remove the old low beam bulb from the bulb holder and replace it with a new one before reassembling everything by following the reverse procedure.


Posted on 25 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the parking light bulb in the Volkswagen Polo 9n? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos