Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on a Volkswagen Polo 1.0 MPI

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Timing belt

See other generations:
Video tutorial

This guide outlines the main steps for removing and replacing the timing belt on a Volkswagen Polo 1.0 MPI. First, open the bonnet of the vehicle and begin by removing the coolant reservoir and the engine mount; then remove the timing cover by lifting the vehicle and disconnecting the V-belt, as shown in the video.

At this point, take the necessary references for replacing the timing belt, also replacing the water pump if necessary; reassemble all previously removed components.


Posted on 7 April 2026 by ScegliAuto


Related tutorials

When and How to Replace the Timing Belt on the Volkswagen Polo 1.4 MPI
When and How to Replace the Timing Belt on the Volkswagen Polo 1.4 MPI
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this guide, you will find the main instructions for removing and replacing the timing belt on the Volkswagen Polo 1.4 MPI; for this type of engine…
Guide to Replacing the Timing Belt on a Volkswagen Polo 1.2
Guide to Replacing the Timing Belt on a Volkswagen Polo 1.2
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide provides the necessary instructions on how and when to replace the timing belt on a Volkswagen Polo 1.2 3-cylinder engine. For this type o…
Replacing the Timing Belt on a Volkswagen Polo 1.4
Replacing the Timing Belt on a Volkswagen Polo 1.4
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide outlines the main steps to remove and replace the timing belt on a Volkswagen Polo with a 1.4 petrol engine. First, lift the vehicle and r…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - How much does it cost to replace the timing chain of the Volkswagen Polo 1.2 petrol? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos