Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Mount on the Volkswagen Routan

Model: Volkswagen Routan MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine mount

Video tutorial

In today's video tutorial, learn how to remove and replace the engine mount on the Volkswagen Routan by following the instructions below. First, lift the engine from below with a jack, placing a soft material board; then unscrew the bolts of the engine mount using a socket wrench, as shown in the video.

Once the engine mount is removed, replace it with the new one, using the original part; then secure it properly with its hardware and reassemble everything, following the video tutorial to the end!


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Volkswagen Routan
How to Replace the Cabin Air Filter in a Volkswagen Routan
Volkswagen Routan (2009-2014 / MK 1) If you own a Volkswagen Routan and want to replace the cabin air filter yourself, just follow the steps outlined below. Before you start, make sure t…
How to Replace the Radiator on a Volkswagen Routan?
How to Replace the Radiator on a Volkswagen Routan?
Volkswagen Routan (2009-2014 / MK 1) To replace the radiator on a Volkswagen Routan, open the hood to access the screws securing the plastic cover at the front of the engine compartment.…
How to Replace the Key Battery in the 2011 Volkswagen Routan
How to Replace the Key Battery in the 2011 Volkswagen Routan
Volkswagen Routan (2009-2014 / MK 1) The smart key for your 2011 Volkswagen Routan has a very simple and minimalist design that makes replacing the battery inside even easier and quicker…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos