Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Air Filter in a Volkswagen Routan

Model: Volkswagen Routan MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

Video tutorial

If you own a Volkswagen Routan and want to replace the cabin air filter yourself, just follow the steps outlined below. Before you start, make sure to turn off the vehicle completely and park it on a flat surface for maximum safety.

Next, enter your Routan, go to the passenger side, and lower the glove compartment. Work on the side hooks to remove it completely, then locate the filter box at the back.

Remove the cover and proceed with replacing the filter.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Volkswagen Routan (2009-2014 / MK 1) This guide shows how to replace the engine air filter on the Volkswagen Routan Mk1. First, remove the engine cover and loosen the metal retaining cla…
Volkswagen Routan (2009-2014 / MK 1) The cabin filter for your Volkswagen Routan is located under the glove compartment in front of the passenger seat. To access it, open the glove compa…
Volkswagen Routan (2009-2014 / MK 1) The spare tire on the Volkswagen Routan is located at the bottom of the vehicle, near the front seats. To access it, open the rear trunk and go to th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos