Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Filter on the Volkswagen Routan

Model: Volkswagen Routan MK 1 - Years 2009-2014
Part: Cabin air filter

The cabin filter for your Volkswagen Routan is located under the glove compartment in front of the passenger seat. To access it, open the glove compartment, then using your hands, squeeze the sides of the compartment inward so that the guides can bypass the latch, allowing the compartment to drop completely and giving you access to the adjacent area. In front of you, you will find a rectangular container with two tabs on the short sides; opening these will allow you to remove the cover and access the old cabin filter. It is very important to note the direction of the airflow (indicated with an air flow arrow) on the old filter just removed, so you can install the new one in the same direction. At this point, reattach the cover and secure the glove compartment guides.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Routan (2009-2014 / MK 1) If you own a Volkswagen Routan and want to replace the cabin air filter yourself, just follow the steps outlined below. Before you start, make sure t…
Volkswagen Routan (2009-2014 / MK 1) This guide shows how to replace the engine air filter on the Volkswagen Routan Mk1. First, remove the engine cover and loosen the metal retaining cla…
Volkswagen Routan (2009-2014 / MK 1) If you are looking for a guide to properly replace the button battery inside your Volkswagen Routan key (2009-2014), read the following instructions …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos