Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Air Filter on the Volkswagen Routan Mk1

Model: Volkswagen Routan MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

Video tutorial

This guide shows how to replace the engine air filter on the Volkswagen Routan Mk1. First, remove the engine cover and loosen the metal retaining clamp on the engine air intake hose. At this point, you can pull the ducts from the filter housing, and with the two plastic clips, you can open the box. Now, remove the old filter element.

It is recommended to clean the filter housing and its cover with a vacuum cleaner. Install the new filter element in the correct position and close everything up. Check the proper positioning of the parts and reattach the air intake hose.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

Volkswagen Routan (2009-2014 / MK 1) If you own a Volkswagen Routan and want to replace the cabin air filter yourself, just follow the steps outlined below. Before you start, make sure t…
Volkswagen Routan (2009-2014 / MK 1) The cabin filter for your Volkswagen Routan is located under the glove compartment in front of the passenger seat. To access it, open the glove compa…
Volkswagen Routan (2009-2014 / MK 1) In today's video tutorial, learn how to remove and replace the engine mount on the Volkswagen Routan by following the instructions below. First, lift…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos