Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery in a Volkswagen Routan

Model: Volkswagen Routan MK 1 - Years 2009-2014
Part: Key

If you are looking for a guide to properly replace the button battery inside your Volkswagen Routan key (2009-2014), read the following instructions carefully and put them into practice. First, remove the physical emergency key. Next, using a flathead screwdriver, completely open the cover and locate the battery inside. Remove it and then replace it with a new one. Finally, reassemble the cover correctly and test the key to ensure it works.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery in the 2011 Volkswagen Routan
How to Replace the Key Battery in the 2011 Volkswagen Routan
Volkswagen Routan (2009-2014 / MK 1) The smart key for your 2011 Volkswagen Routan has a very simple and minimalist design that makes replacing the battery inside even easier and quicker…
How to Replace the Key Fob Battery of the Volkswagen Routan?
How to Replace the Key Fob Battery of the Volkswagen Routan?
Volkswagen Routan (2009-2014 / MK 1) Replacing the key fob battery of the Volkswagen Routan is a very simple and inexpensive operation. Let's see how to proceed in this tutorial. For thi…
How to Replace the Key Battery on a Volkswagen Routan
How to Replace the Key Battery on a Volkswagen Routan
Volkswagen Routan (2009-2014 / MK 1) If you need to replace the battery in your remote key, refer to the instructions below. Use a sharp object to pry open the side profile of the key co…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos