Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of the Volkswagen Routan?

Model: Volkswagen Routan MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

Video tutorial

Replacing the key fob battery of the Volkswagen Routan is a very simple and inexpensive operation. Let's see how to proceed in this tutorial.

For this, you will only need a replacement CR2032 battery and a small flathead screwdriver. First, press the bottom button and pull out the emergency metal key. Then, insert the screwdriver into the indicated slot and, prying it open, separate the two halves of the key fob. Once opened, you can proceed with the battery replacement, making sure to position the replacement in the correct orientation.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Volkswagen Routan Remote?
How to Replace the Battery in the Volkswagen Routan Remote?
Volkswagen Routan (2009-2014 / MK 1) The Volkswagen Routan remote uses a button cell battery with code C2032. Get one before proceeding to open the remote. It is advisable to keep a spar…
How to Replace the Key Battery in a Volkswagen Routan
How to Replace the Key Battery in a Volkswagen Routan
Volkswagen Routan (2009-2014 / MK 1) If you are looking for a guide to properly replace the button battery inside your Volkswagen Routan key (2009-2014), read the following instructions …
How to Replace the Key Battery in the 2011 Volkswagen Routan
How to Replace the Key Battery in the 2011 Volkswagen Routan
Volkswagen Routan (2009-2014 / MK 1) The smart key for your 2011 Volkswagen Routan has a very simple and minimalist design that makes replacing the battery inside even easier and quicker…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos