|
Do it yourself
| |||
| ||||
How to Replace the Key Battery on a Volkswagen Routan
Model: Volkswagen Routan
MK 1
- Years:
2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
If you need to replace the battery in your remote key, refer to the instructions below. Use a sharp object to pry open the side profile of the key cover. Once the security key is extracted and the cover is removed, lift the block containing the buttons, and you will find the battery underneath. Use the same sharp object to pry it out of its housing and take the new CR 2032 battery to insert it into its place. Then, reposition the block with the buttons and reattach the key cover.
Updated on 6 July 2026 by ScegliAuto
Related tutorials
Volkswagen Routan
(2009-2014 /
MK 1)
The smart key for your 2011 Volkswagen Routan has a very simple and minimalist design that makes replacing the battery inside even easier and quicker…
Volkswagen Routan
(2009-2014 /
MK 1)
If you are looking for a guide to properly replace the button battery inside your Volkswagen Routan key (2009-2014), read the following instructions …
Volkswagen Routan
(2009-2014 /
MK 1)
The Volkswagen Routan remote uses a button cell battery with code C2032. Get one before proceeding to open the remote. It is advisable to keep a spar…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.097
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |