Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in a Volkswagen Passat?

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will see how to replace the cabin filter in a Volkswagen Passat, a very simple and quick operation. First, go to the passenger side, then open the glove compartment, locate the two clips along the top edge of the compartment, and unclip them using a screwdriver or a plastic spatula.

Next, separate the glove compartment from the dashboard, open the long rectangular door, and remove the old filter. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.


Posted on 1 September 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Filter on a Volkswagen Passat
How to Remove the Cabin Filter on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Learn how to remove and replace the cabin filter in the cabin of a Volkswagen Passat. The cabin filter is located at the bottom left of the glove com…
How to Replace the Cabin Filter on a Volkswagen Passat
How to Replace the Cabin Filter on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) To replace the cabin filter on a Volkswagen Passat, start by removing the fastening rivets of the carpet located directly below the glove compartment…
How to Replace the Cabin Air Filter in the Volkswagen Passat B8
How to Replace the Cabin Air Filter in the Volkswagen Passat B8
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) If you want to replace the cabin air filter in your Volkswagen Passat B8, simply follow the procedure described in this new guide. Before starting th…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos