Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Mount on the Volkswagen Golf 4 2.0

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine mount

See other generations:
Video tutorial

In this video tutorial, learn how to dismantle and replace the engine mount on the fourth series Volkswagen Golf with a 2.0 engine. First, open the bonnet of your car and start by removing the coolant reservoir, disconnecting the various hoses; then lift the engine with a jack and begin to unscrew the bolts of the engine mount using a socket, as shown in the video.

At this point, replace it with the correct new mount; then reassemble everything by applying the reverse procedure of dismantling!


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Replacing the Gearbox Mount of the Volkswagen Golf
Replacing the Gearbox Mount of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this brief and simple video, you will learn how to remove and replace the gearbox mount of the Volkswagen Golf, following the instructions below. …
Replacement of Oil Dipstick Support Tube
Replacement of Oil Dipstick Support Tube
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The breakage of the plastic tube that acts as a support and guide for the oil dipstick is a common fault in Volkswagen engines; however, it is an ine…
Replacement of Shock Absorber Mount
Replacement of Shock Absorber Mount
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) If you hear a creaking noise coming from the engine bay, especially when steering, it is likely due to wear on the shock absorber mount. To replace i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos