Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

In this brief and simple video, you will learn how to remove and replace the gearbox mount of the Volkswagen Golf, following the instructions below. First, lift the vehicle and locate the transmission mount; then use a jack to support the transmission, as shown in the video.

Next, undo the bolts of the gearbox mount to remove it; replace it with the new one, using the original part, and secure it properly with its bolts, following the video tutorial to the end!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) This guide outlines the steps to change the manual gearbox oil on a Volkswagen Golf. First, lift the vehicle and begin by removing the plastic engine…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, see how to change the gear oil on a Volkswagen Golf 4. Position your car on a column lift and raise it to a comfortable height for dis…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In today's tutorial, you will see the instructions that will allow you to change the transmission oil on the sixth series Volkswagen Golf in simple s…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos