|
Do it yourself
| |||
| ||||
How to replace the service belt and pulleys of the Volkswagen Polo IV 1.4 petrol.
Model: Volkswagen Polo
MK IV, Polo IV, Polo 4, MK 4, 9N
- Years 2001-2009
In this video, we will see how to change the serpentine belt on a Volkswagen Polo IV 1.4 petrol: we start by disconnecting the negative pole of the battery and lifting the car from the passenger side: support it with jack stands because we will need to work underneath. Remove the wheel and the right front fender, in order to reach the serpentine belt; with a 16mm wrench, loosen the tensioner and remove the old belt. You can find the Continental belt and tensioner set on motointegrator. It with the code 6PK1613K1 at the price of 55.34 euros + 9.95 euros for shipping. Insert the new belt following the correct path (the writing on the belt must be readable clockwise). Lift the tensioner to loosen the tension, remove the locking pin and release the tensioner to tighten the belt. Check that the belt is correctly aligned on all pulleys, reassemble the fender, reconnect the battery, and put the wheel back in place. Start the engine and check for any abnormal belt noises.
Posted on 1 September 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Polo
(2001-2009 /
MK IV, Polo IV, Polo 4, MK 4, 9N)
In this tutorial, we can see how to replace the serpentine belt in the Volkswagen Polo, an extremely simple and quick operation. First of all, make s…
Volkswagen Polo
(1994-2003 /
MK III, Polo III, Polo 3, MK 3, 6N)
To replace the timing belt on a Volkswagen Polo, open the bonnet to access the left side of the engine block. Here, there will be a plastic cover tha…
Volkswagen Polo
(2001-2009 /
MK IV, Polo IV, Polo 4, MK 4, 9N)
To replace the auxiliary belt on a Volkswagen Polo IV: First, lift the vehicle using a jack and two axle stands. It’s always best not to rely too muc…
Other guides you may be interested in
|
Fuses Location and Diagram for the Volkswagen Crafter
In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.561
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |