Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dipped Beam Bulb on Volkswagen Polo

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

See other generations:
Video tutorial

Let's look at the steps to remove and replace the dipped beam bulb of the front headlight on the Volkswagen Polo. First, open the bonnet of the vehicle and start unscrewing the screws securing the headlight unit, disconnecting the electrical connector of the bulbs to remove it; then remove the plastic protective cap for the lights by unhooking the metal clip to take out the bulb.

At this point, install the new dipped beam bulb of the correct type and with the same fitting; reassemble the headlight unit, checking the operation of the lights.


Posted on 10 April 2026 by ScegliAuto


Related tutorials

Replacing the dipped beam bulb on a Volkswagen Polo
Replacing the dipped beam bulb on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this very short video tutorial, you can see how to replace the dipped beam bulb (H7) on a fourth-generation Volkswagen Polo, model 9N produced fro…
How to Replace the Front Headlight Bulb of the Volkswagen Polo
How to Replace the Front Headlight Bulb of the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this guide, we will discover the instructions that will allow us to remove and replace the dipped beam bulb of the front headlight of the Volkswag…
How to Replace the Position Light Bulb in a Volkswagen Polo?
How to Replace the Position Light Bulb in a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Replacing the position light bulb in the Volkswagen Polo MK4 is very simple. Open the bonnet and unscrew the large cap located at the back of the hea…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos