Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light Bulb in a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the position light bulb in the Volkswagen Polo MK4 is very simple. Open the bonnet and unscrew the large cap located at the back of the headlamp.

Locate the bulb in question, which is next to the dipped beam bulb. Press the clips of the bulb holder and pull it out of its housing.

This operation may be difficult due to the limited space available. Finally, replace the bulb with an equivalent type, specifically a W5W, and reassemble everything by following the reverse procedure.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Replace the Side Light Bulb on a Volkswagen Polo
How to Replace the Side Light Bulb on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Here are the main steps for removing and replacing the side light bulb on a Volkswagen Polo's front headlamp. First, open the bonnet of the vehicle a…
How to Replace the Position Light Bulb on a Volkswagen Polo
How to Replace the Position Light Bulb on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the position light bulb on the vehicle, follow these steps: open the bonnet and locate the light to be replaced and its corresponding opti…
Replacing the Daytime Running Lights on the Front Headlights of the Volkswagen Polo
Replacing the Daytime Running Lights on the Front Headlights of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Here are the instructions to remove and replace the position bulbs or daytime running lights on the front headlights of the Volkswagen Polo. First, o…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos