Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Daytime Running Lights on the Front Headlights of the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

Here are the instructions to remove and replace the position bulbs or daytime running lights on the front headlights of the Volkswagen Polo. First, open the bonnet of the vehicle and disconnect the bulb holder along with the daytime running light connector; then remove the bulb from its housing, as shown in the video.

Now install the new position bulb of the correct type and with the same fitting; check its operation before reinserting it into the headlamp, and replace the other position light in the same way.


Posted on 18 September 2026 by ScegliAuto


Related tutorials

How to remove the headlight switch button on the Volkswagen Polo
How to remove the headlight switch button on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To remove the button for turning the headlights on and off on the Volkswagen Polo model 9n, you need to rotate the knob towards the centre at the mar…
How to Disable Daytime Running Lights on the Volkswagen Polo
How to Disable Daytime Running Lights on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Disabling the daytime running lights on the Volkswagen Polo may vary depending on the year and model of the vehicle. Below are general instructions f…
Replacing Daytime Running Lights on a Volkswagen Polo
Replacing Daytime Running Lights on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video tutorial, we will see how to remove and replace the daytime running lights on a Volkswagen Polo in simple steps. First, open and lift t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos