Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to deactivate the daytime running lights of the Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Headlight bulb
Operation: How to deactivate the daytime running lights of the Volkswagen Polo

The deactivation of the daytime running lights on the Volkswagen Polo may vary depending on the year and model of the vehicle. Below, I will provide general instructions for deactivating the daytime running lights. Please note that you should always consult the specific owner's manual for your Volkswagen Polo model to obtain detailed and accurate instructions. Make sure the vehicle is turned off and the keys are removed from the ignition. Enter the cabin and sit in the driver's seat. On most models, look for a small dial or lever on the left or right side of the dashboard, near the steering wheel. This may be labeled as "Light" or "Lights". This switch allows you to adjust the brightness of the dashboard lights, but in some models, it can also be used to activate or deactivate the daytime running lights. Rotate or move the switch according to the instructions provided on it or in the owner's manual. In some newer models, deactivating the daytime running lights may require accessing a navigation system or multifunction display on the dashboard. Use the menus and settings to find the option for daytime running lights and deactivate them. If the above instructions do not apply to your Volkswagen Polo model, you will need to check the owner's manual or consult a Volkswagen dealer for specific instructions on deactivating the daytime running lights.


Posted on 19 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the parking light bulb in the Volkswagen Polo 9n? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos