Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Replacement of Volkswagen Polo daytime running light bulb.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Headlight
Operation: Replacement of Volkswagen Polo daytime running light bulb.

Let's see how to replace the burnt-out bulb of the Volkswagen Polo's daytime running light. Stand in front of the headlight containing the bulb to be changed and, using a hook or an L-shaped wrench, remove the plastic frame by acting on the lower hole. Now unscrew the two screws at the bottom that hold the spotlight in place and unlock it from its housing. On the backside, on one side, the bulb holder is positioned, which we will release with a rotation, allowing us to remove the old bulb and replace it with a new one. Position the bulb holder, secure the headlight with its screws, and put the frame back in its place.


Posted on 15 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the front headlight of the Volkswagen Polo 8? Read Answer
    • Polo 2001-2009 - How much does the right headlight of a Volkswagen Polo cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos