Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : How to remove and replace the rear light of a Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Tail light
Operation: How to remove and replace the rear light of a Volkswagen Polo

Let's see how to remove and replace the rear light of a Volkswagen Polo: we open the boot of the luggage compartment, with a screwdriver we unscrew (with a socket wrench or screwdriver with insert) the tightening nuts placed on the inside of the rear light; as soon as the rear light is free from any constraint, we can detach it from the bodywork (disconnect the relative power supply terminals). We replace damaged bulbs with pieces of the same size and voltage. Finally we go to reassemble the new lighthouse and proceed backwards in the assembly operations of the lighthouse with all the parts.


Posted on 1 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos