Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light from the Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light

See other generations:
Video tutorial

To remove the rear light from the Volkswagen Polo, open the tailgate to access the components inside the boot. Here, near the light you need to remove, there will be a screw that must be taken out: this will allow you to extract the light from its housing after disconnecting the connector at the back.

You can then connect the new light by inserting it into its housing: secure it by reinserting the screw inside the boot.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Replacing Stop/Rear Light Bulb on Volkswagen Polo MK3
Replacing Stop/Rear Light Bulb on Volkswagen Polo MK3
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video tutorial, you will learn how to remove and replace the bulbs of the rear light on a third series Volkswagen Polo by following these sim…
How to Replace the Rear Light Bulb on a Volkswagen Polo
How to Replace the Rear Light Bulb on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the rear light bulb on a Volkswagen Polo, open the boot and lift the side carpet in line with the light. Underneath, you will find a pin t…
How to Replace the Rear Light on a Volkswagen Polo
How to Replace the Rear Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) This guide outlines how to remove and replace the rear light on a Volkswagen Polo. First, open the boot and remove the side carpet covering to access…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos