Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Volkswagen Polo

Model: Volkswagen Polo - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

This guide outlines how to remove and replace the rear light on a Volkswagen Polo. First, open the boot and remove the side carpet covering to access the rear light assembly; then unscrew the plastic screw and disconnect the bulb connector, pulling the light out from the outside as shown in the video.

At this point, replace the bulbs if necessary or the entire rear light, securing it correctly to the bodywork and reconnecting the electrical connection; check the operation of the stop lights!


Posted on 20 October 2026 by ScegliAuto


Related tutorials

How to remove and replace the rear headlamp of a Volkswagen Polo
How to remove and replace the rear headlamp of a Volkswagen Polo
Volkswagen Polo (2001-2009 / Polo 4, Polo IV, MK IV, MK 4, 9N) Here’s how to remove and replace the rear headlamp of a Volkswagen Polo: open the boot lid, and using a screwdriver, unscrew (with a socket or screwd…
How to Replace the Rear Light Bulb in a Volkswagen Polo?
How to Replace the Rear Light Bulb in a Volkswagen Polo?
Volkswagen Polo (2001-2009 / Polo 4, Polo IV, MK IV, MK 4, 9N) To replace the rear light bulb in a Volkswagen Polo, open the boot lid and move the carpet inside the boot to access the light. Unscrew the retaining…
How to Replace the Rear Headlamp Bulbs on a Volkswagen Polo
How to Replace the Rear Headlamp Bulbs on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK 5, Polo 5, Polo V, MK V) How do you replace the bulbs in the rear headlamp on a Volkswagen Polo? This operation is very simple. Follow these steps: open the boot lid, then re…

Replacing the Gear Knob on the Mercedes Sprinter MK 2

With regular use, the gear knob on the Mercedes Sprinter may show signs of wear that necessitate its replacement. To carry out the replacement, sit in the driver's seat, and using a pair of pliers, rotate the knob left and right to unlock it. Grip the knob and gently pull it off while ensuring that the spring mounted on the lever does not get lost. Take the new knob, align it with the gear pattern, tap it on gently, and finish inserting it using a rubber mallet.

Watch the video!


by ScegliAuto

More videos