Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : How to replace the rear light bulb on the Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Rear light bulb
Operation: How to replace the rear light bulb on the Volkswagen Polo?

In order to replace the rear light bulb of the Volkswagen Polo you have to open the tailgate of the luggage compartment, moving the carpet inside the trunk in correspondence with the headlight. By unscrewing the wheel below, you can remove the headlight by disconnecting the connector at the rear. In this way, the headlight can be opened and the bulbs inside it can be extracted and replaced with new spare parts. After the replacement, it will be possible to close the headlight by connecting it to the connector and fixing it to its housing.


Posted on 29 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos