Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb on a Volkswagen Polo, open the boot and lift the side carpet in line with the light. Underneath, you will find a pin that must be completely removed to extract the light from its housing.

After removing the light, pull out the bulb, disconnect it from the connector, and connect the new bulb. Once the bulb has been replaced, insert it back into the light unit and secure it in its place.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb in a Volkswagen Polo?
How to Replace the Rear Light Bulb in a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the rear light bulb in a Volkswagen Polo, open the boot lid and move the carpet inside the boot to access the light. Unscrew the retaining…
How to replace the rear light bulb on a Volkswagen Polo?
How to replace the rear light bulb on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the rear light bulb on a Volkswagen Polo, open the tailgate and then detach the side trim of the boot, corresponding to the light: beneath…
How to Replace the Rear Light Bulb on the Volkswagen Polo?
How to Replace the Rear Light Bulb on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the rear light bulb on the Volkswagen Polo, you will need to open the rear hatch and detach the side trim of the boot corresponding to the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos