Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on a Volkswagen Polo

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Tail light bulb

How do you replace the bulbs in the rear headlamp on a Volkswagen Polo? This operation is very simple. Follow these steps: open the boot lid, then remove the cover from the side trim of the boot. Unscrew the plastic pin of the rear headlamp (disconnect the power connectors attached to the headlamp) and pull it out from its housing. Replace the damaged bulbs with new ones (same voltage) at hand. Refit the headlamp with the respective securing pin. Test the correct operation of the lights using the appropriate switch.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulbs in the Rear Light on a Volkswagen Polo Mk3
How to Replace the Bulbs in the Rear Light on a Volkswagen Polo Mk3
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) To replace the bulbs in the rear light on a Volkswagen Polo, first access the rear of the light by pulling back the carpet located behind the light f…
Dismantling the rear light of the Volkswagen Polo
Dismantling the rear light of the Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) In this video tutorial, we will see how to dismantle the rear light of a Volkswagen Polo. First, open the boot lid and move the side carpet: then pry…
How to Replace a Fog Light on the Volkswagen Polo 6?
How to Replace a Fog Light on the Volkswagen Polo 6?
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) Note that the work described here is identical between the Volkswagen Polo 6 and the Volkswagen Polo 5, which is why the proposed video shows a Volks…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos