Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb on a Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Tail light bulb

Need to replace the bulb inside the rear headlamp of a Volkswagen Polo? Open the boot and see how to remove the headlamp. Unscrew the plastic retaining nuts of the rear headlamp, disconnect the power connectors at the back of the headlamp, and pull it out of its housing. Replace the damaged bulbs with new ones (same voltage) at hand. Refit the headlamp with the respective retaining nuts, and reattach the inspection cover at the top of the boot. Once reassembled, close the boot and test the operation of the bulbs.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Light Bulb on a Polo
How to Replace the Brake Light Bulb on a Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) How do you replace the damaged bulb in the rear light of a Polo? Lift the tailgate and locate the parts to be removed. Remove the covering cloth to a…
How to replace the rear headlight bulb of the Volkswagen Polo 4
How to replace the rear headlight bulb of the Volkswagen Polo 4
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this new guide, we will discover the necessary steps to correctly complete the replacement of the rear headlight bulb of your Volkswagen Polo Mk4.…
How to Replace the Rear Light Bulb on a Volkswagen Polo
How to Replace the Rear Light Bulb on a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To replace the rear light bulb on a Volkswagen Polo, open the boot and lift the side carpet in line with the light. Underneath, you will find a pin t…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos