Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb on a Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light bulb

See other generations:
Video tutorial

How do you replace the damaged bulb in the rear light of a Polo? Lift the tailgate and locate the parts to be removed. Remove the covering cloth to access the back of the rear light.

Find the screws after removing the cover of the boot, and unscrew the retaining nuts located behind the rear light. Remove the light and disconnect the electrical connectors.

Replace the damaged bulbs inside the rear light, then mount the light back onto the bodywork. Turn on the vehicle's instrument panel and test the operation of the light bulbs.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulb on a Volkswagen Polo?
How to Replace the Third Brake Light Bulb on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the third brake light bulb on a Volkswagen Polo, open the tailgate to access the screws securing the interior trim. Once these screws are …
How to Replace the Third Brake Light Bulbs on the Volkswagen Polo?
How to Replace the Third Brake Light Bulbs on the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this tutorial, see how to replace the third brake light bulbs on the Volkswagen Polo, a very simple and quick task. Before proceeding, ensure that…
How to Replace the Rear Light Bulb on a Volkswagen Polo
How to Replace the Rear Light Bulb on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the rear light bulb on a Volkswagen Polo, open the boot and lift the side carpet in line with the light. Underneath, you will find a pin t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos