Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulbs on the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part:

In this tutorial, see how to replace the third brake light bulbs on the Volkswagen Polo, a very simple and quick task. Before proceeding, ensure that the key is not inserted for safety. Start by opening the boot lid, then unclip the panel located just behind the brake light and, using a cross-head screwdriver, remove the fixing screws. Once done, pull the light unit away from the boot lid, disconnect the connector, and open it to replace the faulty bulb.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Third Brake Light Bulbs on the Volkswagen Polo 9N2
Replacing the Third Brake Light Bulbs on the Volkswagen Polo 9N2
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this video tutorial, learn how to disassemble and replace the third brake light bulbs on the Volkswagen Polo 9N2, fourth generation, in simple and…
Removing the Third Brake Light on a Volkswagen Polo
Removing the Third Brake Light on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this guide, learn how to remove the third brake light on a Volkswagen Polo. First, open the boot lid: then, unclip the plastic cover located at th…
How do you replace the third brake light bulb of the Volkswagen Polo?
How do you replace the third brake light bulb of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To replace the third brake light bulb of the Volkswagen Polo, you need to open the rear hatch so that you can loosen the screws that hold the inner l…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos