Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Third Brake Light Bulbs on the Volkswagen Polo 9N2

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Light bulb

See other generations:
Video tutorial

In this video tutorial, learn how to disassemble and replace the third brake light bulbs on the Volkswagen Polo 9N2, fourth generation, in simple and quick steps. First, open the rear hatch of the boot and start by removing the plastic trim at the top; then unscrew the screws of the third brake light found inside the holes, as shown in the video.

At this point, remove the bulb holder from the ceiling light and disassemble the bulbs inside, replacing them with new ones; then reassemble everything, applying the reverse procedure!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulb on a Volkswagen Polo?
How to Replace the Third Brake Light Bulb on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the third brake light bulb on a Volkswagen Polo, open the tailgate to access the screws securing the interior trim. Once these screws are …
How to Replace the Third Brake Light Bulb on a Volkswagen Polo?
How to Replace the Third Brake Light Bulb on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the third brake light bulb on the Volkswagen Polo, detach the light unit by using a lever tool to extract it from its housing. Once remove…
How to replace the third brake light on the Volkswagen Polo 3
How to replace the third brake light on the Volkswagen Polo 3
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) Replacing the third brake light of the Volkswagen Polo is a simple and quick operation to be carried out independently. To perform the replacement, w…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos