Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulb on the Volkswagen Polo Mk4

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light bulb

See other generations:
Video tutorial

In this guide, discover the necessary steps to correctly replace the rear bulb on your Volkswagen Polo Mk4. First, park the car on a flat surface and turn it off completely. Then, lift the rear hatch and unscrew the safety latch located at the rear of the headlamp.

At this point, gently pull the entire headlamp towards you and proceed to replace the faulty bulb with a new one. Finally, refit the rear headlamp, and you are done.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Volkswagen Polo
How to Replace the Rear Light Bulb on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the rear light bulb on a Volkswagen Polo, open the boot and lift the side carpet in line with the light. Underneath, you will find a pin t…
How to replace the rear light bulb on a Volkswagen Polo?
How to replace the rear light bulb on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the rear light bulb on a Volkswagen Polo, open the tailgate and then detach the side trim of the boot, corresponding to the light: beneath…
How to Replace the Rear Light Bulb on the Volkswagen Polo?
How to Replace the Rear Light Bulb on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the rear light bulb on the Volkswagen Polo, you will need to open the rear hatch and detach the side trim of the boot corresponding to the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos