Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Tail light bulb

To replace the rear light bulb on the Volkswagen Polo, open the tailgate and move the carpet inside the boot in the area corresponding to the light: under the carpet, you will find a screw that must be manually unscrewed. By removing this screw, you can free the light from its housing by disconnecting the connector: at this point, you can open the light and remove the bulb inside, replacing it with a new spare part and reassembling all the components you just removed.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Stop/Rear Light Bulb on Volkswagen Polo MK3
Replacing Stop/Rear Light Bulb on Volkswagen Polo MK3
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this video tutorial, you will learn how to remove and replace the bulbs of the rear light on a third series Volkswagen Polo by following these sim…
How to Replace the Rear Light Bulb on a 2014 Polo 5
How to Replace the Rear Light Bulb on a 2014 Polo 5
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this video, you will learn how to replace the rear light bulb on a 2014 Polo 5. To begin, ensure the car is off and pull the handbrake. To avoid d…
How to replace the rear light bulb on a Volkswagen Polo?
How to replace the rear light bulb on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To replace the rear light bulb on a Volkswagen Polo, open the tailgate and then detach the side trim of the boot, corresponding to the light: beneath…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos