Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Light bulb

See other generations:
Video tutorial

To replace the rear light bulb on a Volkswagen Polo, start by opening the tailgate. Inside, locate the access panel to the rear light compartment.

You may need to remove some screws or plastic clips to access the panel. Once the panel is removed, you will have access to the back of the light.

Rotate the bulb holder in the indicated direction to unlock it and remove it from the light assembly. Once the bulb holder is extracted, you can pull out the old bulb from its socket and replace it with a new bulb of the correct type.

Make sure to insert the new bulb without touching the glass with your fingers. After inserting the new bulb, reinsert the bulb holder into the light assembly and rotate it in the opposite direction to secure it. Finally, replace the access panel to the rear light compartment and ensure it is securely fastened.

Close the tailgate and check that the new bulb works correctly by turning on the rear lights.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Bulb on the Volkswagen Polo Mk4
How to Replace the Rear Bulb on the Volkswagen Polo Mk4
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this guide, discover the necessary steps to correctly replace the rear bulb on your Volkswagen Polo Mk4. First, park the car on a flat surface and…
How to Replace the Rear Light Bulb in a Volkswagen Polo?
How to Replace the Rear Light Bulb in a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the rear light bulb in a Volkswagen Polo, open the boot lid and move the carpet inside the boot to access the light. Unscrew the retaining…
How to Replace the Rear Light Bulb on a Volkswagen Polo
How to Replace the Rear Light Bulb on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the rear light bulb on a Volkswagen Polo, open the boot and lift the side carpet in line with the light. Underneath, you will find a pin t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos