Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the headlight switch button on the Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Push button

To remove the button for turning the headlights on and off on the Volkswagen Polo model 9n, you need to rotate the knob towards the centre at the mark for the main beam headlights. Immediately after, pull the button outwards with force, being careful not to damage the connector. Disconnect the connector and connect it to the new button. Insert the new button into its housing and test its operation by turning on the sidelights, main beam headlights, and fog lights.

Posted on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to access the secret compartment of the Volkswagen Polo
How to access the secret compartment of the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Today we will explain how to access the secret compartment of the Volkswagen Polo. To access the compartment opening, we must get into the car and si…
How to Replace the Light Switch on a Volkswagen Polo
How to Replace the Light Switch on a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) How do you replace the light switch on a Volkswagen Polo? Follow these steps carefully. The switch is located on the left side of the dashboard. Grip…
How to remove the headlight switch for the Volkswagen Polo
How to remove the headlight switch for the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Today we will explain how to remove the switch for the front headlights of the Volkswagen Polo car. To remove the switch, we need to rotate the knob …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos