Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Bulbs in the Rear Headlight of the Volkswagen Touran

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

Let’s discover the steps to remove and replace the rear headlight and its bulbs on the Volkswagen Touran. First, open the tailgate and unscrew the screws of the stop light to detach and remove it from the bodywork, disconnecting the electrical connector of the lights; then separate the bulb holder from the housing to access all the stop lights, as shown in the video.

Now replace the faulty bulbs with new ones of the correct type and with the same fitting; reassemble the rear headlight!


Posted on 18 September 2026 by ScegliAuto


Related tutorials

Replacing the Headlamp and Rear Bulbs of the Volkswagen Touran
Replacing the Headlamp and Rear Bulbs of the Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Today’s steps will show you how to dismantle and replace the rear lamp and its bulbs on the Volkswagen Touran. First, open the boot and start unscrew…
Remove a Rear Light from a Volkswagen Touran
Remove a Rear Light from a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Remove a rear light from a Volkswagen Touran to replace the damaged bulbs. Open the boot lid, and using a lever, remove the plastic cover of the rear…
How to Change the Front Headlight Bulbs on Volkswagen Touran
How to Change the Front Headlight Bulbs on Volkswagen Touran
Volkswagen Touran (2015-2024 / 5T, MK 2) Let's see how to change the front headlight bulbs on the Volkswagen Touran: open the bonnet by pulling the lever located at the bottom right of the d…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos