Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Window Switch Panel of a Volkswagen Golf Mk7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Power window switch

How to remove the window switch panel of a Volkswagen Golf Mk7? Before starting the disassembly, disconnect the battery terminals located in the front engine compartment. Use a lever to pry at the bottom of the handle on the door panel, then detach the piece and begin unscrewing the door screws. Using a plastic lever, disengage all the clips by prying around the entire perimeter of the door. Finally, pull away the panel with your hands, (disconnect the opening lever cable, the window regulator connectors, and the speaker connectors). Remove the window switch panel from the door panel, install the new piece, and proceed to reassemble the door.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today we will see the instructions that will allow us to disassemble and replace the window switch panel of the Volkswagen Golf. First, we open the f…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) How do you remove the window switch panel located in the door trim (passenger side) of a Volkswagen Golf 4? Follow these steps for disassembly. Befor…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) In this video tutorial, we will see how to dismantle the window switch panel and the external mirror adjustment on a Volkswagen Golf Mk6 by following…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos