Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Handle on a VW Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Handle

See other generations:
Video tutorial

Is the handle on your Volkswagen Tiguan damaged? Here’s how to remove the door handle. Insert a suitable metal key into the slot above the door (side panel), then use a plastic lever to remove the cover of the handle located on the right side.

Pull out the left part of the handle, then slide it off the car's panel. Compare the handle with the new one and prepare for installation.

Insert the new handle with lock and cover into the door. Test the correct installation and operation of the Tiguan's handle.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Remove the External Door Handle on a Volkswagen Tiguan
How to Remove the External Door Handle on a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Before you start, open the door of your Volkswagen Tiguan. Begin by disengaging and removing the screw cover that secures the handle located on the i…
How to Remove the Rear Door Handle on a Volkswagen Tiguan
How to Remove the Rear Door Handle on a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Here’s how to remove the handle from the rear door of the Volkswagen Tiguan: open the rear door and locate the rubber cap on the outside of the door.…
Removing the External Door Handle on a Volkswagen Tiguan
Removing the External Door Handle on a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) The steps outlined in this guide will show you how to remove and replace the external door handle on the rear door of a Volkswagen Tiguan. First, ope…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos