Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Light Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear light of the Volkswagen Jetta. First, open the boot and locate the cover on the side that you will need to remove: then unscrew the long plastic screw that holds the light in place.

Now you can extract the light from the outside: to remove it completely, simply disconnect the connector. To remove the light attached to the boot, remove the cover, unscrew the light screw, and disconnect the connector!


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Removing the Rear Light of the Volkswagen Jetta
Removing the Rear Light of the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Let's look at how to remove the rear light of the VW Jetta. Lift the rear hatch and secure it, then remove the fabric cover that protects the boot li…
How to Replace the Rear Headlamp Bulb on a Volkswagen Jetta 6
How to Replace the Rear Headlamp Bulb on a Volkswagen Jetta 6
Volkswagen Jetta (2010-2018 / MK 6, A6) If the rear headlamp bulb on your Volkswagen Jetta has stopped working and you want to replace it yourself, simply follow the steps outlined in this …
How to Replace the Rear Headlight Bulbs in the Volkswagen Jetta
How to Replace the Rear Headlight Bulbs in the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the instructions that will allow you to remove and replace the bulbs of the rear headlight of the Volkswagen Jetta. First, open the boot li…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos