Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs in the Volkswagen Jetta

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Tail light bulb

Below are the instructions that will allow you to remove and replace the bulbs of the rear headlight of the Volkswagen Jetta. First, open the boot lid and start removing the carpet lining located on the side to access the bulb holder; then disconnect the electrical connector to remove it, thus accessing all the bulbs, as shown in the video. At this point, remove and replace any faulty bulbs with new ones that have the same fitting, then reassemble the bulb holder onto the light unit!

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light of the Volkswagen Jetta
Removing the Rear Light of the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Let's look at how to remove the rear light of the VW Jetta. Lift the rear hatch and secure it, then remove the fabric cover that protects the boot li…
How to Remove the Rear Light of a VW Jetta
How to Remove the Rear Light of a VW Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Is the light on your car damaged? Let's look at removing the rear light of a VW Jetta. Open and lift the tailgate, access the luggage compartment sid…
How to Replace Rear Bulbs on Jetta
How to Replace Rear Bulbs on Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) How do you replace the front headlamp and bulbs on a Jetta? This operation is not too complicated; let's look at the disassembly. Open and lift the b…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos