Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs in the Volkswagen Jetta?

Model: Volkswagen Jetta A4, MK 4 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, see how to replace the dipped beam bulbs in the Volkswagen Jetta, a very simple and quick operation. To do this, you will need a cross-head screwdriver and, of course, the correct replacement bulbs.

First, remove the battery cover, which prevents access to the rear of the headlamp on the driver's side. Once removed, unscrew the relevant screws, unlock the two metal clips of the large rear cap of the headlamp, open it, disconnect the connector, and unscrew the bulb retaining ring.

Finally, follow the reverse procedure to fit the replacement.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Adjust the Headlights on a Volkswagen Jetta?
How to Adjust the Headlights on a Volkswagen Jetta?
Volkswagen Jetta (1998-2005 / A4, MK 4) In this tutorial, we can see how to adjust the headlights on a Volkswagen Jetta, a very simple and quick operation. First, park the vehicle in front …
Where are the Fuses on the Volkswagen Jetta?
Where are the Fuses on the Volkswagen Jetta?
Volkswagen Jetta (1998-2005 / A4, MK 4) Each fuse in the Volkswagen Jetta is located in one of the dedicated fuse boxes installed in the vehicle: this type of car has two boxes that contain…
How to Replace the Rear Headlight Bulbs in the Volkswagen Jetta
How to Replace the Rear Headlight Bulbs in the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the instructions that will allow you to remove and replace the bulbs of the rear headlight of the Volkswagen Jetta. First, open the boot li…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos