Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light of the Volkswagen Jetta

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Tail light

Let's look at how to remove the rear light of the VW Jetta. Lift the rear hatch and secure it, then remove the fabric cover that protects the boot lining. Once the cover is removed, disconnect and unscrew the securing screws of the rear light (detach the light and the electrical connector). Replace the damaged light bulbs of the rear light (ensure they are of the same size and voltage, preferably of good quality). Refit the new light into the bodywork of the VW Jetta. Test the operation of the light in all its parts.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel of a VW Jetta
Removing the Rear Door Panel of a VW Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) Remove the rear door panel on a Volkswagen Jetta. Use a screwdriver to unscrew the screws located in the space of the upper door opening lever and th…
How to replace the front fog lights on the Volkswagen Jetta
How to replace the front fog lights on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) The following steps will show us how to disassemble and replace the front fog lights of the Volkswagen Jetta. First, let's open the car's hood and st…
How to Replace the Rear Headlamp Bulb on a Volkswagen Jetta 6
How to Replace the Rear Headlamp Bulb on a Volkswagen Jetta 6
Volkswagen Jetta (2010-2018 / MK 6, A6) If the rear headlamp bulb on your Volkswagen Jetta has stopped working and you want to replace it yourself, simply follow the steps outlined in this …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos