Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Boot Panels and Replacing Rear Bulbs on a Volkswagen Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Tail light bulb

In today's video, you will see how to remove and replace the rear light bulbs and how to take off the side panels of the boot on a seventh-generation Volkswagen Golf. First, open the boot lid and remove the plastic covers on the sides of the boot; then, extract the stop bulbs and the position bulbs from inside the light unit, as shown in the video. Now disconnect the power connector if you want to remove the bulb holder from the light; apply the reverse procedure for reassembly!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Bulbs on a Volkswagen Golf
Replacing Rear Bulbs on a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Open the boot lid and notice the side covers located near the rear lights, which are fitted into the boot lining. Remove the cover for the affected l…
Replacement of the reverse light of a Volkswagen Golf
Replacement of the reverse light of a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Let's start immediately with the replacement of the reverse light of our Volkswagen Golf MK6 by opening the rear trunk of the car, then we must remov…
Removing the Rear Seats on Volkswagen Golf 7
Removing the Rear Seats on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this tutorial, you will learn how to remove the rear seats of a seventh-generation Volkswagen Golf. First, remove the boot compartment and then un…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos